The atomizing effect is good - the average diameter of atomized particles is only 60 microns. With the combination of nozzle fog, the amount of fog droplets increases several times, and the total surface area of droplet increases several times, so the efficiency of denitrification is higher and the rate of ammonia escape is lower.

Penetrability - when the water mist is ejected from the nozzle exit, the speed reaches 40m/s, which ensures that the reducing agent can mix with the flue gas fully, thus improving the denitrification efficiency.
Specifications complete - flow from 3kg/h to 250kg/h, spray shape has solid cone and fan, there is always a suitable for your needs.
The large flow regulation ratio - the flow regulation ratio of the single lance is up to 1:5, plus the combination of a plurality of spray guns, which is sure to be suitable for any working condition.
The control is simple - when the work is fixed, the air pressure is constant, the water pressure can be adjusted by adjusting the water pressure, and the change of water quantity has little effect on the spray particle.
Long service life: because the nozzle at a low pressure environment, the hydraulic pressure is less than 0.6MPa, so the nozzle wear is very small, with silicon carbide gun protection tube, nozzle in the protection casing, avoid high temperature, high dust and high velocity of flue gas on nozzle wear.